HP NonStop G-Series - Manual (Page 273)

Software Requirements for Split-Star and
Tri-Star Topologies
Any node that will participate in a ServerNet cluster must have Expand (T9057) software,
which is delivered on the site update tape (SUT). In addition, the Expand/ServerNet Profile
(T0569) is required for clustering. If you order the optional Expand/ServerNet Profile
component, it is delivered on the SUT.
Additional software requirements depend on the topology you use to construct the ServerNet
cluster:
Software
Component
Split-Star Topology
Tri-Star Topology
Operating system
G06.09 or later
(G06.09, G06.10, and G06.11
require SPRs)
G06.13 or later
(G06.13 requires SPRs)
SNETMON/
MSGMON
Depends on operating system. For
compatibility information, see the
SNETMON/MSGMON softdoc. Depends on operating system. For
compatibility information, see the
SNETMON/MSGMON softdoc.
SANMAN T0502AAE or superseding T0502AAG or superseding
Switch Firmware
and Configuration
T0569AAB or superseding T0569AAE or superseding
OSM Client T2752AAB or superseding T2752AAB or superseding
OSM Server
G06.21 or later
(Server components should be
AAB or superseding.)
G06.21 or later
(Server components should be
AAB or superseding.)
SP firmware T1089ABB or superseding T1089ABC or superseding
SCF T9082ACQ or superseding T9082ACQ or superseding
Cable Connections Between Star Groups
Updating to the Split-Star Topology
Updating to the Tri-Star Topology
Updating to the Split-Star Topology
If you are updating to the split-star topology, connect the cables as follows:
Cluster Switch Port Connects to Cluster Switch Port
X1 8 X2 8