Group (i/o or processor enclosure), Attributes – HP NonStop G-Series User Manual
Page 135
SAC are in the Stopped state.
Start
Starts the Gigabyte Ethernet ServerNet adapter (GESA) and the associated Ethernet ServerNet
addressable controller (SAC). The GESA and the SAC must be in the Stopped state before you
perform this action.
During startup, the controller operational code is automatically loaded into the SAC. When the Start
action completes, both the GESA and the SAC are in the Started state.
Stop
Rather than automatically stopping the GESA (as the Abort action does), this action first warns you
if the GESA is currently in use (and stops it only after you confirm).
Group (I/O or Processor Enclosure)
A group contains all the components that are serviced by a pair of
Nonstop S-Series servers, an enclosure contains one group, and a group contains one
.
Location in OSM Tree: Under System
Examples: Group 11
Attributes
Group
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Logical
Service LED State
Indication of whether the service LED is on or off.
On: An OSM user has turned on the service LED by using the Set Service LED
State action.
Off: An OSM user has turned off the service LED by using the Set Service LED
State action.
Turning on the group service LED helps you locate the group for servicing. This
feature is useful when a system consists of multiple enclosures.