Attributes, Actions – HP NonStop G-Series User Manual
Page 182
SEB
The ServerNet expansion boards (SEBs) and cables allow processors in one enclosure to
communicate with processors in another enclosure. Each SEB CRU provides either the ServerNet X
fabric or the ServerNet Y fabric for a group.
Location in OSM Tree: System > Group > Module > SEB
Slot Location: SEBs must be located in slots 51 and 52 of processor enclosures (service side).
Example: SEB (1.1.52)
Attributes
SEB
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Physical
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.
Manufacturer
Identifies the manufacturer of the component.
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Power State
Whether the component is powered on.
Track ID
A unique serial number that identifies the component. Track IDs are used for
tracking components.
Logical
Disabled ServerNet Ports
Which, if any, ServerNet router ports on this CRU are disabled. OSM
actions to disable or enable a ServerNet port are performed as directed by
OSM alarm repair actions.
Actions
Disable ServerNet Port
Disables the specified ServerNet port on this CRU. Perform this action only as directed by OSM
alarm repair actions.