HP NonStop G-Series User Manual
Page 144
Physical
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.
Manufacturer
Identifies the manufacturer of the component.
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Power State
Whether the component is powered on.
Track ID
A unique serial number that identifies the component. Track IDs are used for
tracking components.
Logical
DCC Voltage
The operational voltage of the IOMF2 CRU (specifically, the raw
voltage supplied to the DC-to-DC converters).
Disabled ServerNet Ports
Which, if any, ServerNet router ports on this IOMF2 CRU are
disabled. OSM actions to disable or enable a ServerNet port are
performed as directed by OSM alarm repair actions.
Fan Voltage
The current voltage of the Fan CRU.
Main Rail Voltage
The voltage of the Main Rail, which supplies power to the IOMF2
CRU from its own power supply
Main Rail Voltage After Fuse
The current voltage on the Main Rail of the IOMF2 CRU, measured
after the fuse.
MOSFET Voltage
The voltage measured between the MOSFET switch and the diode to
the DCC. The MOSFET switch is located on the Other Rail between
the alternate power supply and the DCC.
Other Rail Voltage
The voltage of the Other Rail, which connects the IOMF2 CRU to
the other power supply in the enclosure (to provide power in the
event of a problem with the Main Rail power supply).
Other Rail Voltage After Fuse
The current voltage on the Other Rail of the IOMF2 CRU, measured
after the fuse.
Rail Maximum Voltage
The maximum voltage limit (60 volts) for the IOMF2 CRU.
Rail Minimum Voltage
The minimum voltage (39.6 volts) that must be available to power
the IOMF2 CRU.
SCSI-X Voltage
The voltage of the SCSI-X path, the primary path used for disks on a
system.
SCSI-Y Voltage
The voltage of the SCSI-Y path, the path configured for mirrored
disks on a system.
Storage ASIC