HP NonStop G-Series - Manual (Page 133)

Default File Version The version of the firmware to be used for a (boot) Firmware Update .
Compare State
The differences, if any, between the current and default boot firmware
versions.
Values
Actions
Abort
Terminates operation of the G4SA ServerNet addressable controller. When the Abort action finishes,
the SAC is in the Stopped state.
Dump
Copies a memory image from a G4SA SAC to a file on the local system. The file will be the last
(highest numbered) file of the chain started with the file specified in the
Dump File Name attribute of
the SAC.
Caution: The SAC and PIFs will be unavailable while the SAC is being dumped.
Firmware Update
Updates the boot firmware for the G4SA SAC.
Responsive Test
Runs an online test that verifies the SAC is integrated with the LAN subsystem, is owned, and is in
the Started state.
Start
Loads the controller operational code and starts the ServerNet addressable controller. The SAC must
be in the Stopped state before you perform this action. When the Start action completes, the SAC is
in the Started state.
Stop
Rather than automatically stopping the G4SA SAC (as the Abort action does), this action first warns
you if the SAC is currently in use (and stops it only after you confirm).
Test Verify
Runs the power-on self-test for the SAC.
GESA (Gigabyte Ethernet ServerNet Adapter)
Attributes
Actions