HP NonStop G-Series User Manual
Page 192
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Logical
Router Type
The type of router.
Values: SCSI Extender or SCSI-to-Fiber Converter
Logical Device Number
The number assigned to the router by the file system.
Communication State
Whether the resource is communicating to the host system.
Values: Communicating, Not Communicating, Unknown
Product ID
A unique number that identifies the product as a SCSI Extender (2
models) or SCSI to Fiber Converter. Otherwise, Unknown is shown.
Device State
The state of the component as known to the operating system (open
scsi process) on the server.
Configured Controller
Location
The location of the configured SCSI controller.
Example: PMF.SAC-3.GRP-1.MOD-1.SLOT-55
Physical
Part Number
The part number of the component that was assigned in manufacturing. Use part
numbers for identifying and ordering parts. This is not the spare part number.
Process Pair
Configured Processors
The 2 processors in which this I/O process is configured to run.
Example: 0,1
Primary Execution State
The state of the primary I/O process.
Values: Running, Stopped
Primary Process ID
The process ID of the primary I/O process. If the state of the primary I/O
process is Stopped, this ID is not displayed.
Example: 1,296
Backup Execution State
The state of the backup I/O process.
Values: Running, Stopped
Backup Process ID
The process ID of the backup I/O process. If the state of the backup I/O
process is Stopped, this ID is not displayed.
Example: 1,285
SCSI Interface