Actions, Fesa (fast ethernet servernet adapter), Attributes – HP NonStop G-Series User Manual
Page 107: Fesa, Fesa cru, Node name, Port name, Indicate the presence of fcsa
Node Name
A number (read from the hardware) that uniquely identifies each FCSA FSAC. Until
an attached disk is configured and started, the Node Name attribute is displayed as
0xFFFFFFFFFFFFFFF.
Port Name
A number (read from the hardware) that uniquely identifies each fibre-channel port
connected to the FCSA FSAC. Until an attached disk is configured and started, the Port
Name attribute is displayed as 0xFFFFFFFFFFFFFFF.
Actions
Responsive Test
Verifies that the FCSA FSAC is present and responding. (To pass the test, a disk using this FSAC
must be configured and started.)
FESA (Fast Ethernet ServerNet Adapter)
An adapter that connects the ServerNet connections inside a server to a 10/100Base-TX local area
network (LAN).
The Fast Ethernet ServerNet adapter (FESA) CRU contains one Fast Ethernet ServerNet addressable
controller (
), which contains one Ethernet physical interface, that corresponds to the one
Ethernet port on each FESA CRU.
Location in OSM Tree: System > Group > Module > FESA
Slot Location: FESA CRUs can be located in slots 53 and 54 in processor enclosures (service side)
or in slots 51, 52, 53, and 54 in IOMF or IOMF2 enclosures (service side).
Example: FESA $ZZLAN.FESA1 (1.1.53)
Attributes
FESA
Service State
Displayed in the Attributes tab and Attributes dialog box only if attention or service is
required.
Physical
Power State
Whether the component is powered on.
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Track ID
A unique serial number that identifies the component. Track IDs are used for
tracking components.
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.