HP NonStop G-Series - Manual (Page 133)

Actions
Abort
Terminates operation of the MIOE PIF. When the Abort action finishes, the PIF is in the Stopped
state.
Configure LIF
Configures the associated LIF.
Start
Starts the MIOE PIF. The PIF must be in the Stopped state before you perform this action. When the
Start action completes, the PIF is in the Started state.
Stop
Rather than automatically stopping the MIOE PIF (as the Abort action does), this action first warns
you if the PIF is currently in use (and stops it only after you confirm).
MIOE SAC
The MIOE ServerNet addressable controller (MIOE SAC) is a LAN controller that is a component of
the MIOE. Each MIOE contains one MIOE SAC, which contains one Ethernet port, known as a
physical interface (PIF) object.
Location in OSM Tree:System > Group > Module > PMF2 > MIOE > MIOE SAC
Example:MIOE SAC $ZZLAN.MIOE0.0
Attributes
MIOE SAC
Service State
Displayed in the Attributes tab and Attributes dialog box only if attention or service is
required.
Values
Logical
Processor Access List
The currently available processors that can access the MIOE CRU.
Example: 0,1
Device State
The state of the component as known to the operating system on the server.
Values
Owning Processor
The processor to which the MIOE CRU is connected.
Example: 0