Attributes, Actions – HP NonStop G-Series User Manual
Page 116
Location in OSM Tree: System > Group > IOAM Enclosure > IOAM > G4SA > G4SA SAC >
G4SA PIF
Example: G4SA PIF $ZZLAN.G4SA1.0.A
Attributes
G4SA PIF
Service State
Displayed in the Attributes tab and Attributes dialog box only if attention or service is
required.
Logical
Configured Interface Type
Displays the configured interface, as specified by the
action.
Values: Copper, Fiber, or Autodetect.
Current Configured Speed The transmission rate for the ServerNet addressable controller.
Device State
The state of the component as known to the operating system on the
server.
Duplex Mode
The transmission mode for the ServerNet addressable controller.
Values: Half Duplex, Full Duplex, Unknown
Hardware MAC Address
The media access control (MAC) address of the PIF hardware.
Interface Type
Displays the actual interface that is physically present.
Values: Copper, Fiber, and Unknown (if nothing is plugged in)
Link Pulse State
A value of Up confirms that the cable from the PIF to the LAN is
connected and operational. A value of Down indicates a problem with
LAN connectivity.
Maximum Speed
The maximum transmission rate for the ServerNet addressable
controller.
Values: 10 megabits per second, 100 megabits per second, Unknown
Network MAC Address
The media access control (MAC) address of the PIF network.
Processors with Data Path
Lists the processor numbers for processors that have a successful data
path to the PIF. If no processor has a path, "None" is shown.
Example: 1,2,3,8,9
Actions
Abort
Terminates operation of the G4SA PIF. When the Abort action finishes, the PIF is in the Stopped
state.