Attributes, Actions, Storage router – HP NonStop G-Series User Manual
Page 168
Attributes
SSAC
Service State
Displayed in the Attributes tab and Attributes dialog box only if attention or service is
required.
Physical
Type
The type of CRU this SAC is connected to.
values: SSAC, FSAC, SCSI
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Track ID
A unique serial number that identifies the component. Track IDs are used for
tracking components.
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.
Logical
Configured Type
The type of device supported by this SAC.
Values: Disk, Tape, SCSI Controller, Not Configured, Unknown
Actions
Responsive Test
Verifies that the component is connected and responding.
Storage Router
This object represents one of these resources:
SCSI Extender. A pair of SCSI extenders (one SCSI-to-Fiber extender and one Fiber-to-SCSI
extender) can be used to increase the distance between the host system and any of these devices to a
maximum of 10 kilometers:
9840 cartridge tape drive
●
T525x Super DLT tape drive
●
5242 DAT72 tape drive (all models)
●
Virtual tape subsystems (all models)
●
N152x LTO tape drives (all models)
●