Actions – HP NonStop G-Series User Manual
Page 111
Device State
The state of the component as known to the operating system on the
server.
Firmware
Version
The VPROC of the firmware currently loaded on the FRU.
Default File Name
The name of the file to be used for a firmware update.
Default File Version The version of the firmware to be used for a firmware update .
Compare State
The differences, if any, between the current and default firmware versions.
Actions
Add LBU
Configures a ServerNet/FX or ServerNet/FX2 adapter as an LBU. An LBU is the SCF logical
equivalent for the adapter.
Delete LBU
Removes an LBU from the system configuration database. An LBU is the SCF logical equivalent for
the ServerNet/FX or ServerNet/FX2 adapter.
Dump Controller
Writes the data from the memory of the ServerNet/FX or ServerNet/FX 2 adapter field-replaceable
unit (FRU) to the file $SYSTEM.ZSERVICE.ZFOXDUMP.
The ServerNet/FX FRU must be in the Stopped state to perform this action.
External Loopback Test
Performs the external loopback firmware diagnostic test.
Before running this test, you must use the Stop action to put the ServerNet/FX or ServerNet/FX 2
adapter field-replaceable unit (FRU) in the Stopped state.
Firmware Update
Updates the firmware for a ServerNet/FX adapter (FXSA) or ServerNet/FX 2 adapter (FX2SA).
Responsive Test
Verifies that the component is installed and responding.
Set FOX Cluster Number
Sets the node to which the ServerNet/FX or ServerNet/FX2 adapter FRU is connected.