HP NonStop G-Series - Manual (Page 143)

Enable ServerNet Port
Enables the specified ServerNet port on this CRU. Perform this action only as directed by OSM
alarm repair actions.
Parameter: Port Number
Force Power Off
Use this action to power off the CRU and all of its subcomponents only if the Prepare to Power Off
or Power Off actions fail. The Force Power Off does not perform the other precautionary checks that
are done by the Prepare to Power Off and Power Off actions. However, these steps are taken:
If the SP on this PMF CRU is designated as Active (Primary), resets the SP so the peer SP
becomes primary instead ●
Disables the battery ●
Halts the processor on this PMF CRU ●
Power Off
Upon successful completion of the Prepare to Power Off action, you can use the Power Off action to
turn off power to the PMF2 CRU and all components. The Power Off action first performs
precautionary checks to ensure that you can safely power off the CRU. These checks ensure:
The other PMF2 CRU in this enclosure exists and is powered on. ●
The status of the power supply on the other PMF2 CRU in this enclosure is OK. ●
The other PMF2 CRU in this enclosure has ServerNet accessibility. ●
The processor in the other PMF2 CRU in this enclosure has connectivity to CPU 0 or CPU 1. ●
The battery is disabled. ●
The processor is halted. ●
The SP status is Active Secondary. ●
If the checks are completed successfully, the CRU is powered off. If any of these checks fail, the
CRU remains powered.
The Power Off action does not disable the battery, halt the processor, or switch the SP status to
Active Secondary. Use the Prepare to Power Off action to perform these operations before using the
Power Off action.
Prepare to Power Off
Performs precautionary checks to ensure that you can safely power off the PMF2 CRU and performs
steps to prepare the CRU for the Power Off action. The checks ensure: