HP NonStop G-Series - Manual (Page 190)

UPS Model
The model within a given family of UPS.
Example: R12000 XR
UPS Type The category of the UPS.
UPS Serial Number
The unique number assigned to the UPS in manufacturing. Knowing the
serial number is especially helpful when you need to replace batteries or
required other service.
Example: TU321A1185
Actions
Link to Web Interface
Provides a link to the UPS web interface for detailed device information and configuration.
To log on to the UPS interface, use the User ID, Password, IP address, and (UPS) Name that was
established during initial configuration. For more information, see the Modular I/O Installation and
Configuration Guide.
Rediscover
Causes OSM to refresh and reanalyze the object. Refresh refers to OSM updating the attribute values
displayed in the OSM Service Connection interface. Reanalyze refers to the running of OSM incident
analysis, which checks EMS event messages and creates alarms in OSM if certain conditions exist.
Stop Monitoring
Stops OSM from monitoring the UPS.
Common Attribute Values
Battery Charge Status
Value Meaning
Absent The battery is not installed.
Charged The battery is fully charged
Charging The battery is in the process of being charged.
Disabled
The battery cannot supply power and cannot be charged, possibly because the Disable
Battery action has been performed. You should disable a battery before removal.
Discharged The battery needs recharging or replacement.
Discharging The system is currently drawing power from the battery.
Enabled
The battery can accept a charge and is ready to supply power if the AC power is
unavailable.
Fault Check the battery for alarms. If the condition persists, contact your service provider.