HP NonStop G-Series - Manual (Page 141)

Track ID
A unique serial number that identifies the component. Track IDs are used for
tracking components.
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.
Temperature Sensor
Normal Minimum Value
The minimum acceptable air intake temperature is 5 degrees Celsius. If
the temperature falls below 5 degrees, an alarm is generated.
Current Value
The current temperature, in degrees Celsius (°C), inside the enclosure of
the module.
Normal Maximum Value
The maximum acceptable air intake temperature is 50 degrees Celsius. If
the temperature rises above 50 degrees, an alarm is generated.
Actions
None.
PMF (Processor Multifunction) CRU
Each processor multifunction (PMF) CRU in a NonStop server contains these components:
A processor and memory board (PMB), which contains a processor ●
A power supply (S7000 only) ●
A service processor (SP) ●
Three SCSI controllers ●
And for PMFs in Group 1 only, an MIOE (Ethernet controller) to provide connectivity
between the service processor and the dedicated service LAN (for OSM).
●
Location in OSM Tree: System > Group > Module > PMF
Slot Location: PMF CRUs are located in slots 50 and 55 of a processor enclosure (service side).
Example: PMF (1.1.55)
Attributes
PMF
Service State
Displayed in the Attributes tab and Attributes dialog box only if attention or service is
required.
Values
Physical