HP NonStop G-Series - Manual (Page 271)

remote switch
An HP NonStop Cluster Switch (model 6770) or HP NonStop ServerNet Switch (model
6780) in a ServerNet cluster that is not directly connected to the server that you are
logged on to. The OSM Service Connection cannot perform any actions on a remote
switch. To perform actions or get additional information on a remote switch, use the
OSM Service Connection to log on to a server that is directly connected to the switch.
reset
To stop a processor or service processor (SP) and terminate all the processes running in
it. Resetting a processor does not affect any other processors in the system. Resetting an
SP does not affect any other SP in the system. Reset is a processor action available in the
OSM Service Connection.
resource
A hardware component on the server or within a ServerNet cluster. Examples of
resources are system consoles, processors, memory, disk drives, and fabrics. In some
instances, the term resource includes software such as processes, files, and applications.
See also customer-replaceable unit (CRU) and field-replaceable unit (FRU) .
S
SANMAN
Abbreviation for the external system area network manager process. A NonStop Kernel
process that provides management access to the external ServerNet fabrics.
SCSI plug-in card
A plug-in card (PIC) for the 6760 ServerNet device adapter (ServerNet/DA) that uses a
small computer system interface (SCSI) interface to connect devices to a NonStop
S-series system.
See also plug-in card (PIC) .
SCSI ServerNet addressable controller (S-SAC)
A ServerNet addressable controller (SAC) that is contained within a small computer
system interface (SCSI) plug-in card (S-PIC).
SEB port
A connector on ServerNet expansion boards (SEBs) used for ServerNet links. An SEB
has six emitter-coupled logic (ECL)-based ServerNet ports.
See also MSEB port .
serial copper plug-in card (PIC)