HP NonStop G-Series - Manual (Page 227)

Hardware Revision The hardware revision of the switch PIC.
Presence Whether the PIC is installed and responding.
Logical
Enabled State
The initial state of the component at the time of discovery.
Enabled: The component is operational.
Disabled: The component is present but not operational.
Device State
Indication of whether the switch has a fault.
Values: OK, Fault
Actions
Blink LED Off
Turns off the blinking of the LEDs.
Blink LED On
Causes the LEDs to blink on and off.
Replace
Invokes the Replace Switch Component guided procedure that helps to replace the switch PIC.
Switch Power Supply
A component in the switch modules that converts standard AC line voltage and distributes DC
power to all components in the module.
Location in OSM tree: External ServerNet Fabric > Switch Group > Switch Module > Switch
Power Supply
Example: Power Supply (1010.1.18)
Attributes
Power Supply
Service State
Displayed in the Attributes tab and Attributes dialog box only if attention or
service is required.
Values