Actions, Ups (6770 switch module), Attributes – HP NonStop G-Series User Manual

Page 235: Uninterruptible power supply (ups)

Advertising
background image

Switch Port

The name of the port to which this port is connected.

Format: Port (Group.Module.Slot.Port)

where:
Group can be 1010, 1020, 1030, 1011, 1021 or 1031.
Module can be 1, 2, 3 or 4.
Slot can be 2, 3, 11, 12 or 13.
Port can be 1, 2, 3 or 4.

Actions

None.

UPS (6770 Switch Module)

The uninterruptible power supply (UPS) is a component of a

6770 switch module

that provides

two hours of power if both the primary and backup AC power sources fail.

Location in OSM tree:External ServerNet Fabric > Switch Group > Switch Module > UPS

Example:UPS $ZZSMN.X1

Attributes

UPS

Service State

Displayed in the Attributes tab and Attributes dialog box only if attention or
service is required.

Values

Physical

CRU Type

The VA rating (volts multiplied by amps) and the firmware version of the UPS.

Example: UPS 1440 VA FW -0039

Part Number The part number of the UPS.

Logical

Estimated Charge Remaining The percentage of charge remaining in the UPS batteries.

Remaining Time

The amount of time remaining (in minutes) that the UPS battery
will provide power to the switch in the event that both the
primary and backup rails lose power, or if the input voltage of
the AC power source is not within the allowable range.

Advertising