HP NonStop G-Series - Manual (Page 92)

Configured FSAC Location
Displays the configured location of the FCSA FSAC containing the
backup disk path SCSI controller. This attribute is displayed even if the
physical FCSA FSAC is not present.
Access State Indicates whether the disk is active or inactive.
LUN
The logical unit number of the disk.
Example: 0
FSAC
Represents the actual presence of the FCSA FSAC containing the
backup disk path SCSI controller. This attribute is displayed only if the
physical FCSA FSAC is not present.
Port Name
A number that uniquely identifies the port through which the disk is
connected.
Primary Path
Configured FSAC Location
Displays the configured location of the FCSA FSAC containing the
primary disk path SCSI controller. This attribute is displayed even if
the physical FCSA FSAC is not present.
Access State Indicates whether the disk is active or inactive.
LUN
The logical unit number of the disk.
Example: 0
FSAC
Represents the actual presence of the FCSA FSAC containing the
primary disk path SCSI controller. This attribute is displayed only if
the physical FCSA FSAC is not present.
Port Name
A number that uniquely identifies the port through which the disk is
connected.
Process Pair
Configured Processors
The 2 processors in which this I/O process is configured to run.
Example: 0,1
Primary Execution State
The state of the primary I/O process.
Values: Running, Stopped
Primary Process ID
The process ID of the primary I/O process. If the state of the primary I/O
process is Stopped, this will not be displayed.
Example: 1,296
Backup Execution State
The state of the backup I/O process.
Values: Running, Stopped
Backup Process ID
The process ID of the backup I/O process. If the state of the backup I/O
process is Stopped, this will not be displayed.
Example: 1,285