HP NonStop G-Series - Manual (Page 265)

variety of connection media. See also SEB port .
multifunction I/O board (MFIOB)
A ServerNet adapter that contains ServerNet addressable controllers (SACs) for SCSI
and Ethernet; a service processor ; a router with ServerNet links to the processor , to the
two ServerNet adapter slots, and to one of the ServerNet expansion board (SEB) slots;
and connections to the serial maintenance bus (SMB) , which connects components within
the enclosure to the service processor. The MFIOB is integrated into the I/O
multifunction (IOMF2) CRU .
multilane link
A communication link between HP NonStop Cluster Switches that can consist of multiple
ServerNet cables. Two-lane links and four-lane links are examples of multilane links.
multimode fiber-optic (MMF) ServerNet cable
A fiber-optic cable that either allows more than one mode to propagate or supports
propagation of more than one mode of a given wavelength. MMF ServerNet cable
typically supports shorter transmission distances than
single-mode fiber-optic (SMF)
ServerNet cable .
N
name
For the OSM software, the name attribute is determined by the connection type. When
you use the service connection, the
logical name is used. When you use the low-level
link, the service processor (SP) logical name is used.
Examples of logical names:
$DATA04-P is the logical name of the disk CRU located in group 1, module 1, slot
13. ●
IOMF2.SCSI-3.GRP-1.MOD-1.SLOT-50 is the logical name of the third SCSI bus
on the IOMF2 CRU located in group 1, module 1, slot 50. ●
Examples of service processor (SP) logical names:
SCSICRU.GRP-1.MOD-1.SLOT-3 is the SP logical name of the disk CRU located
in group 1, module 1, slot 3. ●
PMF.SCSI-3.GRP-1.MOD-1.SLOT-50 is the SP logical name of the third SCSI
bus on the PMF CRU located in group 1, module 1, slot 50. ●
network
Two or more computer systems (nodes) connected so that they can exchange information
and share resources.