HP NonStop G-Series - Manual (Page 172)

Primary Host IP Address The primary host IP address configured for the SWAN concentrator.
Alternate Host IP Address
The alternate host IP address configured for the SWAN
concentrator.
Primary TCP/IP Process
The primary TCP/IP process configured for the SWAN concentrator.
Example: $ZTCP2
Alternate TCP/IP Process
The alternate TCP/IP process configured for the SWAN
concentrator.
Example: $ZTCP1
Primary Subnet Mask
The name of the subnet mask configured for the primary host IP
address for the SWAN concentrator.
Example: 255.255.255.0
Alternate Subnet Mask
The name of the subnet mask configured for the Alternate host IP
address for the SWAN concentrator.
Example: 255.255.255.0
Primary Subnet Name
The name of the subnet on the primary TCP/IP process that supports
the SWAN concentrator.
Format: TCPIP process name.subnet name
Example: $ZTCP1.#SN1
Alternate Subnet Name
The name of the subnet on the alternate TCP/IP process that
supports the SWAN concentrator.
Format: TCPIP process name.subnet name
Example: $ZTCP3.#SN1
Primary Gateway IP Address
The primary gateway IP address configured for the SWAN
concentrator.
Example: 192.168.10.30
Alternate Gateway IP Address
The alternate gateway IP address configured for the SWAN
concentrator.
Example: 192.168.11.30
Actions
Start
Starts the SWAN concentrator and its associated CLIPs. When the Start action completes, the
SWAN concentrator and its associated CLIPs are in the Started state.
In a multisystem configuration, this action also causes the current system to take control of the
associated CLIPs. If any of the CLIPs are currently controlled by another system, that system loses
control of those CLIPs.