Attributes, Actions – HP NonStop G-Series User Manual
Page 174
SWAN Paths.
Location in OSM Tree: System > SWAN Collection > SWAN > CLIP
Slot Location: CLIPs are external to the enclosures.
Example: CLIP $ZZWAN.# SWAN2.2
Attributes
CLIP $ZZWAN
Service State
Displayed in the Attributes tab and Attributes dialog box only if attention or service is
required.
Logical
Device State The state of the component as known to the operating system on the server.
Physical
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Track ID
A unique serial number that identifies the component. Track IDs are used for
tracking components.
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.
Firmware
Version
The version of the firmware on the concentrator communications line interface
processor (CLIP) of the ServerNet wide area network (SWAN).
Default File Name
The name of the file to be used for a firmware update.
Default File Version The version of the firmware to be used for a firmware update .
Compare State
The differences, if any, between the current and default firmware versions.
Actions
Firmware Update
Updates the firmware on the ServerNet wide area network (SWAN) concentrator communications
line interface processor (CLIP).
Optional Parameter: File Name of the firmware file.
There is no SWAN Fast Firmware Update guided procedure in OSM because you can use the