HP NonStop G-Series - Manual (Page 237)

Configuration Tag
This table shows the supported configuration tags for each topology:
Topology Supported Configuration Tags* OSM and Guided Procedures Display Value
N/A 0x11111 (manufacturing default) 0x11111
Star 0x10000 Max 8 nodes, nodes 1-8 (0x10000)
Split-star 0x10000 Max 16 nodes, nodes 1-8 (0x10000)
0x10001 Max 16 nodes, nodes 9-16 (0x10001)
Tri-star 0x10002 Max 24 nodes, nodes 1-8 (0x10002)
0x10003 Max 24 nodes, nodes 9-16 (0x10003)
0x10004 Max 24 nodes, nodes 17-24 (0x10004)
* SCF displays the long form of the configuration tag. For example, configuration tag 0x10000
appears in SCF as 0x00010000.Configuration Version
Port Connectivity Status
Value Valid Only For
Reset
Link dead (Loss of optical signal)
Link dead (Transceiver absent)
No link alive
Link alive, port disabled
Link alive, port disabled, neighbor check
in progress
Link alive, port disabled, neighbor check
complete
Link alive, port disabled, neighbor check
failed (Not connected) Zone-to-Zone Interconnect and Layer-to-Layer
Interconnect ports
Link alive, port disabled, neighbor check
failed (Connected to switch)
Switch-to-Node Interconnect ports
Link alive, port disabled, neighbor check
failed (Connected to node) Zone-to-Zone Interconnect and Layer-to-Layer
Interconnect ports
Link alive, port disabled, neighbor check
failed (Connected to switch with invalid
configuration version identifier)
Zone-to-Zone Interconnect and Layer-to-Layer
Interconnect ports
Link alive, port disabled, neighbor check
failed (Connected to switch with
incompatible configuration
Zone-to-Zone Interconnect and Layer-to-Layer
Interconnect ports