Apple Final Cut Pro 5 User Manual

Page 1527

Advertising
background image

176

Part III

Output

 Uncompressed digital and professional analog video formats: These are formats such as

Betacam SP (analog), Digital Betacam, D-5, or HDCAM. VTRs for these formats
support several different video interface connections, such as component analog
(Betacam SP), SDI (Digital Betacam, D-5), and HD-SDI (HDCAM). Final Cut Pro requires
a third-party video interface to connect your computer to the input connections of
the VTR. Unlike DV, which uses the same native file format on tape and disk, the
codecs used by Final Cut Pro to store uncompressed video are not the same as the
native signals recorded on these tape formats.

For example, if you are outputting to Digital Betacam, you should be editing with a
video codec that supports uncompressed video and is compatible with your third-
party video interface. When you output to tape, the video interface converts the
uncompressed video codec to a standard SDI signal, which enters the VTR via an SDI
input and is recorded to a Digital Betacam tape.

An uncompressed video editing system requires fast hard disks, a third-party video
interface to convert the media file format on disk to the input connection on the VTR
(for example, SDI), and a third-party device control adapter (such as a USB-to-serial
port adapter) for communication between Final Cut Pro and the VTR.

 Analog composite video output: Formats like VHS and 3/4” U-matic are still the lowest

common denominator for video distribution, even though these formats are being
replaced by DVD, DV, and QuickTime movie files (two of these aren’t even tape
formats at all!). These formats are mostly used for work-in-progress copies of
your movie.

Choosing an output video format determines your equipment requirements. For
example, if you are editing DV and outputting to DV, your computer’s built-in FireWire
port can transfer video to your camcorder or deck. On the other hand, if you are editing
uncompressed video, your media files and sequence settings must use a video codec
compatible with a third-party video interface which is then connected to your VTR.

Advertising