Apple Final Cut Pro 5 - Manual (Page 939)

152 Part I Media and Project Management
Overview of Audio Filters
Filters in Final Cut Pro are always nondestructive, meaning they are applied to clips but
not to the media files themselves. You can disable or remove filters at any time, so you
can experiment without worrying about altering your media.
The most useful Final Cut Pro audio filters can be separated into four broad categories:
 Equalization (EQ)
 Dynamics (compression and expansion)
 Noise reduction
 Echo and reverb
Note: You can install additional third-party Audio Units plug-ins as needed.
Filter parameters can be viewed and adjusted in the Filters tab in the Viewer. Apply an
audio filter to an audio clip, then click the Filters tab. You can also double-click a filter in
the Effects tab to view its parameters in the Viewer, but you won’t be able to hear any
changes you make since the filter is not applied to a clip. For more information about
applying filters and adjusting parameters, see “
Applying Filters to an Audio Clip ” on
page 161 and “ Making Real-Time Audio Filter Adjustments ” on page 166.
Equalization (EQ) Filters
An audio equalizer allows you to increase or decrease the strength of an audio signal
within selected frequency ranges, or bands. For example, a three-band equalizer may
have a gain control for the lows, midrange, and highs, so you can change the sonic
“shape” of a sound by turning up some frequencies or reducing others. In general, it is
much better to subtract frequencies than to amplify them, as this eliminates the
possibility of distortion.
If you find that a sound is lacking “brilliance,” or high-end frequencies, try filtering out
some of the bass or midrange frequencies. The overall effect is that the high-end
frequencies are stronger than the lower-range frequencies. It’s easy to go too far when
amplifying some frequencies, so get in the habit of reducing frequencies first. Particular
kinds of sound—men’s voices, women’s voices, tape hiss, and traffic noise—all appear at
different frequencies of the audio spectrum. EQ filters can be used for many things, from
minimizing background noise in a recording to accentuating a narrator’s voice over
background music. EQ filters can also create effects like making a voice sound like it is
coming through a telephone or loudspeaker (this is because telephones and loudspeakers
generally don’t reproduce the high and low frequencies, only the midrange).