Apple Final Cut Pro 5 User Manual
Page 234
Advertising
Chapter 17
Overview of Logging and Capturing
233
IV
 Clip Settings: Use this tab to choose which video and audio tracks you capture from
tape. You can choose to capture video only, audio only, or both video and audio, and
you can specify which audio channels you capture. You can also adjust video levels
for each clip using the waveform monitor and vectorscope; audio levels can be
monitored using the audio meters. You can also monitor the incoming audio signal
by selecting the Preview option. For more information, see “
Note: Video levels can only be adjusted for analog video interfaces.
Advertising