Tabs in the log and capture window – Apple Final Cut Pro 5 User Manual
Page 233
232
Part IV
Logging, Capturing, and Importing
Marking Controls
Use these to set In and Out points for a clip on tape.
 Mark In (I): This sets the In point for a clip on tape.
 Clip In Point Timecode field: Shows the timecode value of the currently set In point.
 Go to In Point: This causes the connected VTR to cue to the currently set In point.
 Mark Out (O): This sets the Out point for a clip on tape.
 Clip Out Point Timecode field: Shows the timecode of the currently set Out point.
 Go to Out Point This causes the connected camcorder or VTR to cue to the currently
set Out point.
Tabs in the Log and Capture Window
The Log and Capture window has several tabs:
 Logging: Use this tab to add descriptive information to each clip that you log, such
as reel name, In and Out points, scene/take number, markers, and so on. Much of this
information can also be added later in the Browser. For more information, see
“
Mark In
Clip Out Point
Timecode field
Go to Out Point
Go to In Point
Mark Out
Clip In Point
Timecode field