INFICON STM-2XM 2-Channel Rate/Thickness Monitor - Manual (Page 118)

5 - 38
PN
07
4-
61
4-
P1
A
STM-2XM Operating Manual
5.8.12 Run Screen Lock Codes and Functions
Codes are listed in run length sequences of clicks in right and then left directions.
All sequences start with a right turn value after first entering the Runtime screen or
pressing CANCEL/BACK while the Runtime screen is displayed to clear the
sequence. There are two kinds of codes, those which require test mode on (as a
protection) and those which can be performed at any time (omnipresent). Those
with (T) in function description require test mode on.
Table 5-8 Run screen lock codes and functions
Name Function Combination
test2 (T) Just beep R L2 R L3 R2 L R L3 R L R L R2 L2 R4 L3
ClrSys_Trap (T) Clears system trap R L R L R5 L2
Reboot (T) Reboots R4 6 3 5 2 9 7 (Hits on last 3 of 7)
BRAINDEAD (T) Purges FRAM R4 L4 R4 L4 R3 L3 R3 L3 R2 L2
LCDNORM Default LCD R L R L R3 L2 R3
SETWARN Sets 128 warning value R L R L R2 L R2 L R2