INFICON STM-2XM 2-Channel Rate/Thickness Monitor - Manual (Page 67)

4 - 7
PN
07
4-
61
4-
P1
A
STM-2XM Operating Manual
4.3.1.2 Utilities Pane
Arbitrary file send
Send File to instrument . . . . . . . . . Selects a parameter file (*.2XM) to send to
STM-2XM.
File Dnld Status . . . . . . . . . . . . . . . Displays status of file download to
STM-2XM. Error messages and comments
will be displayed after a file is selected for
transmission.
Arbitrary communication
Send CMD to instrument . . . . . . . . Click to send remote command.
CMD to send . . . . . . . . . . . . . . . . . . Enter command in the CMD to send box.
(See section 5.8, Communications
Commands, on page 5-17 .)
Response . . . . . . . . . . . . . . . . . . . . Receives the reply from the command sent.
Status. . . . . . . . . . . . . . . . . . . . . . . . Displays communications error messages. If
communications have been established
without error, OK: [CMD:@] will be
displayed.