INFICON STM-2XM 2-Channel Rate/Thickness Monitor - Manual (Page 23)

1 - 9
PN
07
4-
61
4-
P1
A
STM-2XM Operating Manual
1.4.6 Operating Environment
Usage . . . . . . . . . . . . . . . . . . . . . . . . Indoor use only
Operating Temperature . . . . . . . . . . 0 to 50°C (32 to 122°F)
Storage Temperature . . . . . . . . . . . . -10 to 60°C (14 to 140°F)
Humidity . . . . . . . . . . . . . . . . . . . . . . Up to 85% RH, non-condensing
Altitude . . . . . . . . . . . . . . . . . . . . . . . Up to 2000 meters
Pollution Degree. . . . . . . . . . . . . . . . 2
1.4.7 Size and Weight
Rack Dimensions (HxWxD) . . . . . . . 8.9 x 24.1 x 25.4 cm (3.5 x 9.5 x 10 in.)
Weight . . . . . . . . . . . . . . . . . . . . . . . 1.25 kg (2.75 lb.)
1.5 Unpacking and Inspection
1 If STM-2XM has not been removed from its packaging, do so now.
2 Carefully examine STM-2XM for damage that may have occurred during
shipping. It is especially important to note obvious rough handling on the
outside of the container. Immediately report any damage to the carrier and to
INFICON.
3 Do not discard the packaging material until inventory has been taken and
installation has been successful.
4 Refer to the invoice to take inventory (see section 1.6 ).
5 To install STM-2XM, see Chapter 2, Installation .
6 For additional information or technical assistance, contact INFICON (refer to
section 1.3 on page 1-5 ).
1.6 Parts and Options Overview
1.6.1 Base Configurations
STM-2XM with US Power Cord . . . . PN STM-2XM-G1
STM-2XM with
European Power Cord . . . . . . . . . . . PN STM-2XM-G2
Thin Film Manuals CD . . . . . . . . . . . PN 074-5000-G1