Lenze E84AYCEO - Manual (Page 145)

Lenze · E84AYCEO communication module (EtherNet/IP™) · Communication Manual · DMS 3.0 EN · 10/2013 · TD17
145
14 Implemented CIP™ objects
14.2 EtherNet/IP objects
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
14.2.4 Ethernet Link Object (246 / 0xF6)
The "Ethernet Link Object" provides general information and status information about the Ethernet
interfaces (IEEE 802.3).
Class attributes
Instance attributes

Note!
Write accesses to writable attributes become effective immediately.
Attribute
ID
Service Name Data type Value
1 Get Revision UINT 3 (0x0003)
2 Get Max. Instance UINT 2 (0x0002)
3 Get Number of Instances UINT 2 (0x0002)
4 Get Optional Attribute List: STRUCT of:
Number Attributes UINT 4 (0x0004)
Optional Attributes ARRAY of
UINT
7 ... 10
(0x0007.0008.0009.000A)
6 Get Max. ID Number Class
Attributes
UINT 0x0007
7 Get Max. ID Number Instance
Attributes
UINT 0x000A
Attribute
ID
Service Name Data type Value
1 Get Interface Speed UDINT Current baud rate
• 10 Mbps
• 100 Mbps
2 Get Interface Flags DWORD Status bits of the Ethernet interface
 Instance attribute "Interface Flags"
(attribute 2) ( 146)
3 Get Physical Address ARRAY of
USINT[6]
MAC address of the Ethernet interface
6 Set Interface Control STRUCT of:
Control Bits WORD Control bits for the Ethernet interface
 Instance attribute "Control Bits"
(attribute 6, Interface Control) ( 147)
Forced Interface Speed UINT Baud rate [in Mbps] at which the Ethernet
interface is to be operated ( C13017 ).
Example values:
• 10 = 10 Mbps
• 100 = 100 Mbps
7 Get Interface Type USINT Interface type (transmission medium)
• 0: Unknown interface type
• 1: Device-internal interface (e.g.
embedded switch)
• 2: Twisted pair (e.g. 100Base-TX), Lenze
setting
• 3: Optical fibre (e.g. 100Base-FX)
• 4 ... 255: Reserved