Lenze E84AYCEO - Manual (Page 6)

1 About this documentation
6
Lenze · E84AYCEO communication module (EtherNet/IP™) · Communication Manual · DMS 3.0 EN · 10/2013 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Target group
This documentation is intended for all persons who plan, install, commission and maintain the
networking and remote servicing of a machine.

Tip!
Current documentation and software updates with regard to Lenze products can be found
in the download area at:
www.Lenze.com
Information regarding the validity
The information given in this documentation is valid for the following devices:
From software version 01.02, the "AC Drive Profile" of the Inverter Drives 8400 is supported from
version V13.00.
Screenshots/application examples
All screenshots in this documentation are application examples. Depending on the firmware
version of the communication module and software version of the installed engineering tools
(»Engineer«, »RSLogix 5000«) , the screenshots in this documentation may differ from the screen
representation.
Extension module Type designation From hardware
version
From software
version
Communication module EtherNet/IP E84AYCEO VA 01.01