Lenze E84AYCEO - Manual (Page 56)

8 I/O data transfer (implicit messages)
56
Lenze · E84AYCEO communication module (EtherNet/IP™) · Communication Manual · DMS 3.0 EN · 10/2013 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8 I/O data transfer (implicit messages)
To exchange I/O data (implicit messages) between the host system (scanner) and the drive
(adapter), you have to ...
• Assign the I/O data to the internal ports (MCI) in the drive (adapter):
 I/O data mapping ( 57)
 I/O configuration in the »Engineer« ( 62)
• Configure the I/O data transfer in the host (scanner):
 I/O configuration with »RSLogix 5000« version 19 or lower ( 68)
 I/O configuration with »RSLogix 5000« version 20 or higher ( 73)