Lenze E84AYCEO - Manual (Page 62)

8 I/O data transfer (implicit messages)
8.4 I/O configuration in the »Engineer«
62
Lenze · E84AYCEO communication module (EtherNet/IP™) · Communication Manual · DMS 3.0 EN · 10/2013 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.4 I/O configuration in the »Engineer«
8.4.1 Lenze technology application / configuring user-definable parameter sets

How to configure the Lenze technology applications / user-definable parameter sets in the
»Engineer«:
1. Select the application (C00005 = 1000) in the Application parameters tab.
In the example, the "speed actuating drive" application is configured.
2. Make the default setting of the I/O configuration.
Select "MCI" control mode (C00007 = 40).