Lenze E82EV 8200 vector 0.25kW-2.2kW - Manual (Page 120)

Electrical installation
Mains connection
Connection plan for controllers type E82xVxxxK2C (230/240 V mains)
5
l
120 EDK82EV222 DE/EN/FR 13.0
Mains connection
Connection plan for controllers type E82xVxxxK2C (230/240 V mains)
(
Stop!
ƒ Only connect the controller to the permitted mains voltage ( ^ Technical data). A
higher mains voltage destroys the controller!
ƒ Some controllers may only be actuated with a mains choke or mains filter. This
requirement can differ with regard to operation at rated power and operation at an
increased rated power.
ƒ The leakage current to earth (PE) is > 3.5 mA. In accordance with EN 61800−5−1 a
fixed installation is required. The PE conductor has to be designed double.
E82EV551K2C
E82EV751K2C
X1.1
X1.1
E82EV251K2C
E82EV371K2C
E82EV152K2C
E82EV222K2C
X1.1
N
1.5 mm 2 1.5 mm 2 1.5 mm 2 1.5 mm 2
2.5 mm 2 2.5 mm 2 2.5 mm 2 2.5 mm 2 2.5 mm 2 2.5 mm 2
PE L1
1/N/PE AC 230 V/240 V
+UG -UG L1 L2/N L3/N L1 PE
L2 PE L1
2/PE AC 230 V/240 V
+UG -UG L1 L2/N L3/N L1 PE
PE L1 L2 L3
3/PE AC 230 V/240 V
+UG -UG L1 L2/N L3/N L1 PE
PE L1 L2
2/PE AC 230 V/240 V
+UG -UG L1 L3 PE L2/N
PE L1 N
1/N/PE AC 230 V/240 V
+UG -UG L1 L2/N L3 PE
PE L1 N
1/N/PE AC 230 V/240 V
L1 L2/N PE
L2/N
PE L1 L2 L3
3/PE AC 230 V/240 V
+UG -UG L1 L3 PE
2/PE AC 230 V/240 V
PE L1
L1 L2/N PE
L2
0 0
8200vec012
0 Route two cables with 1.5 mm 2 each to the terminals!
X1.1/+UG, X1.1/−UG Supply for DC−bus operation