Lenze E82EV 8200 vector 0.25kW-2.2kW - Manual (Page 84)

l
84 EDK82EV222 DE/EN/FR 13.0
Scope of supply
Position Description
0 8200 vector frequency inverter
1 Label (required for mounting in accordance with UL) ^ 104
2 Support for standard fixing ^ 104
3 EMC shield sheet with shield clips for the motor cable and for the motor temperature
monitoring feed cable ^ 119
4 2−pole terminal strip for motor PE and motor shield at X2.1 ^ 119
5 EMC shield sheet with fixing screws and shield clamp for shielded control cables ^ 119
6 Plug connector 2*13 pole for function modules on FIF interface ^ 130
X1.1 Terminal strip for mains connection, DC supply (3 − 7 pole, according to device type) ^ 120
^ 121
X1.2 Terminal strip for relay output ^ 127
X2.1 Terminal strip for motor connection, connection of brake resistor (optional)
^ 126
X2.2 Terminal strip for PTC connection or thermal contact (NC contact) of the motor
Mounting instructions
Interfaces and displays
Position Description Function
 2 light−emitting diodes
(red, green) Status display ^ 154
‚ AIF interface
(automation interface) Slot for communication modules ^ 132
E82ZBC keypad, XT EMZ9371BC keypad
Fieldbus communication module type EMF21xx...,
e.g. PROFIBUS−DP EMF2133IB
ƒ FIF interface
(function interface) With cover for operation without function modules
Or slot for function modules ^ 130
Standard I/O PT E82ZAFSC010
Application I/O PT E82ZAFAC010
Fieldbus function modules type E82ZAFxC...,
e.g. PROFIBUS−DP PT E82ZAFPC010