MacDon M150 SP - Manual (Page 108)

HEADER OPERATION - A SERIES
Form 169017 / 169087 / 169095
106
Revision C
6.6.3 AUGER SPEED
CAUTION
Check to be sure all bystanders have cleared
the area.
6.6.3.1 A40D Headers
On A40D double knife headers, the auger speed
can be changed independently from the reel
speed, with a switch on the CDM.
Change auger speed as follows:
6.6.3.2 A30S and A30D Headers
On A30 Series auger headers, the auger speed is
fixed to the knife speed.
NOTE
The auger speed can be independently
changed from the knife speed by changing
the drive sprocket. Refer to A30S, A30D
and A40D Self Propelled Windrower
Headers Operator’s Manual.
Display the auger speed as follows:
ENGAGE HEADER
HEADER INDEX
SWITCH - OFF
ON GSL PRESS SELECTOR BUTTON
OR SELECT SWITCH ON CDM FOR
##.# AUGER SPEED
##.# = 00.0 - 99.0
00.0 = 150 rpm
* 99.0 = 320 rpm
* Auger Speed Not To Exceed 320 rpm.
DISPLAY
SELECTOR
DISPLAY
HEADER INDEX
FAST
SLOW
ENGAGE HEADER
ON CDM PRESS
FAST OR SLOW
DISPLAY SHOWS
##.# AUGER SPEED
DONE
SPEED
O.K.?
NO
YES
PRESS DISPLAY SELECTOR
FOR ##.# AUGER SPEED
HEADER INDEX
SWITCH - OFF
##.# = 4.7 - 9.9
4.7 = 150 rpm
* 9.9 = 320 rpm
* Auger Speed Not To Exceed 320 rpm.