MacDon M150 SP - Manual (Page 56)

WINDROWER OPERATION
Form 169017 / 169087 / 169095
54
Revision C
6.3.3 PRE-SEASON CHECK
a. Perform the following safety checks at the
beginning of each operating season:
CAUTION
• Review the Operator’s Manual to refresh
your memory on safety and operating
recommendations.
• Review all safety signs and other decals
on the windrower and note hazard areas.
• Be sure all shields and guards are properly
installed and secured. Never alter or
remove safety equipment.
• Be sure you understand and have
practiced safe use of all controls. Know
the capacity and operating characteristics
of the machine.
• Store a properly stocked first aid kit and
charged fire extinguisher on the
windrower.
b. Perform the following checks:
1. Drain off excess hydraulic oil added for
storage. Refer to Section 7.12.2 Changing
Hydraulic Oil.
2. Remove plastic bags and/or tape from all
sealed openings (air cleaner intake, exhaust
pipe, fuel tank).
3. Charge battery and install. Be sure terminals
are clean and cables are connected securely.
4. Adjust tension on A/C compressor belt. See
Section 7.8.10.1 or 7.9.10.1 Tension.
5. Cycle A/C switch to distribute A/C refrigerant
oil.
c. Perform annual maintenance. See Section 7.14
MAINTENANCE SCHEDULE.
6.3.4 DAILY CHECK
a. Check the machine for leaks or any parts that are
missing, broken, or not working correctly.
NOTE:
Use proper procedure when searching for
pressurized fluid leaks. Refer to Section
7.12.7 Hoses and Lines.
b. Clean the windows and mirrors to be sure of good
visibility in all directions. Stand on the platform to
access the rear window. Hold onto the hand-
holds on the cab front corners and stand on the
header anti-slip strips to wash the front window.
c. Clean all lights and reflective surfaces to maintain
visibility to others.
d. Perform Daily maintenance. Refer to Section 7.14
MAINTENANCE SCHEDULE.