MacDon M150 SP - Manual (Page 196)

MAINTENANCE AND SERVICING
Form 169017 / 169087 / 169095
194
Revision C
7.11.13.4 Main Fuses - 125 Amp
The 125 amp main fuse holders are located on the
frame, under the right cab-forward side platform,
beside the battery.
Access the fuses as follows:
DANGER
Stop engine and remove key from ignition
before leaving Operator’s seat for any reason.
A child or even a pet could engage an idling
machine.
a. Stop engine, and remove key.
b. Move right cab-forward side platform rearward.
c. To check condition of fuse, pull tab (A) and open
cover (B).
d. Visually examine fuse (C) for indications of
melting.
e. To remove fuse (C), remove two nuts (D), and pull
fuse free from holder. Existing wiring may need to
be pulled off the stud first.
f. Install new fuse on studs, and any existing wiring
that was removed.
g. Secure with nuts (D).
h. Close cover (B), and secure with tab (A).
i. Return platform to normal position. Ensure lock
engages.
B
D
C
M150 - TWO FUSES (SHOWN)
M200 - THREE FUSES
B
A