MacDon M150 SP - Manual (Page 192)

MAINTENANCE AND SERVICING
Form 169017 / 169087 / 169095
190
Revision C
d. Pull lamp out of socket.
e. Disconnect harness from lamp.
IMPORTANT
Do not touch the glass of the halogen bulb,
as the oils or other chemicals from your skin
will cause the bulb to fail prematurely.
f. Connect harness to new lamp, place lamp in
socket, and line up flat side on lamp with recess in
socket.
g. Place retainer over lamp, and pinch tabs to secure
retainer to socket.
h. Line up the three lugs (one is longer) in the base
with slots in lens, and seat the lens against the
rubber seal.
i. Turn the lens clockwise to lock it in place.