MacDon M150 SP - Manual (Page 124)

MAINTENANCE AND SERVICING
Form 169017 / 169087 / 169095
122
Revision C
7.5 MAINTENANCE PLATFORMS
Swing away platform/stair units are provided on
both sides of the windrower for access to the
Operator’s station and engine bay maintenance.
7.5.1 OPENING/CLOSING PLATFORMS
a. Push latch (A) down, and pull platform (B) toward
walking beam, until it stops and latch re-engages
in open position.
b. To move platform back to closed position, release
latch (A), and move platform forward until it stops
and latch re-engages.
7.5.2 OPENING/CLOSING PLATFORM FOR
MAJOR SERVICING
To improve access to the hydraulics plumbing and
battery, the platforms can be swung away from the
windrower.
Right side cab-forward platform is shown.
a. Open platform as follows:
1. Open engine compartment hood to lowest
position.
IMPORTANT
Failure to open hood will result in damage
to the hood when the platform is
repositioned.
2. Remove nut and bolt (C), and swing link (D)
clear of battery and/or valve block.
3. Unlock latch (A), and move platform (B)
toward open position.
(continued next page)
B
B
A
D
C