MacDon M150 SP - Manual (Page 190)

MAINTENANCE AND SERVICING
Form 169017 / 169087 / 169095
188
Revision C
c. Remove light from receptacle.
d. Pinch the wire retainer (L), and lift away from
hooks.
e. Remove bulb (M) from body, and pull wire from
connector (N).
IMPORTANT
Do not touch the glass of the halogen bulb
as the oils or other chemicals from your skin
will cause the bulb to fail prematurely.
f. Match slots on new bulb (M) with lugs (O) in
optical unit, and insert bulb into unit.
g. Secure bulb with wire retainer (L).
h. Push wire into connector (N).
i. Position light into light receptacle, ensuring top is
up, and secure with bezel (K) and screws (C).
7.11.6 RED AND AMBER LIGHTS
DANGER
Stop engine and remove key from ignition
before leaving Operator’s seat for any reason.
A child or even a pet could engage an idling
machine.
a. Shutdown engine, and remove the key. Turn off
the lights.
NOTE
Hold onto the hand-holds (A) on the cab
front corners and stand on the header anti-
slip strips, or stand on the maintenance
platform when accessing the red and amber
lights.
b. Remove two screws (B) from lens, and remove
lens.
c. Push and twist light bulb (D) to remove from
socket.
d. Install new bulb (D) in socket ensuring that bulb
base is properly engaged in socket. Use Bulb
Trade #1157 for red tail-lights, and #1156 for
amber lights.
e. Reinstall lens with screws (B).
D
C
K
B
A
N
L
M
O