MacDon M150 SP - Manual (Page 19)

OPERATOR’S STATION
Form 169017 / 169087 / 169095
17
Revision C
5 OPERATOR’S STATION
The Operator’s station is designed for operating
the windrower in a cab-forward mode (working
mode), or in an engine-forward mode (transport
mode).
The operator station, which includes the seat,
console, and steering column, pivots 180° so that
the operator maintains access to the windrower
controls and gauges regardless of the direction of
travel.
5.1 OPERATOR CONSOLE
The console contains controls to operate the
windrower, as well as amenities for the operator.
The console position is adjustable to suit each
particular operator. The console is attached to the
seat, and does not require adjustment when
repositioning the Operator’s seat.
a. Pull lever (A), and slide console fore or aft to
desired position. The height also increases
slightly as the console is moved aft. Release lever
to lock console.
b. To adjust only fore-aft, loosen nuts (B) under
console and move as required.
c. Tighten nuts.
A
HEADER
CONTROLS
SECTION 5.17
WINDROWER CONTROLS
SECTION 5.16
THROTTLE
ENGINE / WINDROWER
CAB DISPLAY MODULE
(CDM)
B