MacDon M150 SP - Manual (Page 18)

SPECIFICATIONS
Form 169017 / 169087 / 169095
16
Revision C
M150 M200
HEADER LIFT/TILT
Type Hydraulic
Gear Pumps (2)
Displacement 0.84 cu.in. (13.8 cc)
Flow 11.5 U.S. gpm (46.5 L/min)
System Pressure (Relief / Max) 2500 psi (17.24 MPa)
HEADER FLOTATION
Primary Adjustment Manual, External, Draw-Bolt With Springs (1 per side)
Fine Adjustment Hydraulic, In-Cab Switch
Automatic
Hydraulic, 3 Programmable Settings For All Headers
(Deck Shift Compensation On Draper Headers)
CAB
Dimensions
Width 63 in. (1600 mm)
Depth 68.3 in. (1735 mm) (at top of window)
Height 64.6 in. (1640 mm)
Volume 125 cu.ft. (3540 L)
Seat
Driver Adjustable Air-Ride Suspension, Seat Belt
Training Folding, Cab Mounted, Seat Belt
Windshield Wiper
Front 31.5 in. (800 mm) Blade
Rear 22 in. (560 mm) Blade
Heater 24,000 Btu/h (7038 W)
Air Conditioning 28,280 Btu/h (8288 W)
Electrical Outlets Two Live, Three On Ignition
Mirrors One Inside (Transport), Two Outside (Field)
Radio Two Speakers and Antenna Factory Installed. Radio Dealer Installed
SYSTEM MONITORING
Speeds
Ground (mph or km/h), Engine (rpm), Knife (spm), Disc (rpm),
Reel (rpm or mph/km/h), Conveyor (Ref. No.)
Header
Height, Angle, Float, Optional Knife or
Reel Drive Pressure
Height, Angle, Float, Knife Drive and
Reel Drive Pressures
TIRE OPTIONS
Size
Drive 18.4 - 26 Bar, 18.4 - 26 Turf, 600-65 R28 Bar, 23.1 - 26 Turf, 580-70 R26 Turf
Rear
7.5 - 16SL Single Rib, 10 x 16 Front Steer Tire
16.5L - 16.1 Rib Implement Flotation, Forked Caster
Pressure Drive Bar - 32 psi (221 kPa), Turf - 20 psi (138 kPa)
Rear 10 psi (69 kPa)
FRAME AND STRUCTURE
Dimensions Refer to Section 4.1 WINDROWER DIMENSIONS
Frame to Ground (Crop Clearance) 45.7 in. (1160 mm)
Weight
Base 10,700 lb (4858 kg) 11,400 lb (5176 kg)
Max GVW 21,500 (9750 kg)
Max CGVW 23,100 lb (10,480 kg)
NG Header Compatibility
SK A30S Auger, D50, D60S Harvest Header
DK A30D, A40D Auger, D60D Harvest Header
R80 Disc Rotary Header
NOTES: 1. Specifications and design are subject to change without notice, or obligation to revise previously sold units.
2. Weights do not include options .