MacDon M150 SP - Manual (Page 140)

MAINTENANCE AND SERVICING - M150 ENGINE
Form 169017 / 169087 / 169095
138
Revision C
k. Tighten the filter an additional ½ to ¾ turn by
hand.
IMPORTANT
Do not use a filter wrench to install the oil
filter. Over-tightening can damage the
gasket and filter.
l. Install the oil pan drain plug (C).
m. Remove oil filler pipe cap (B), and add engine oil.
The engine requires 10.6 U.S. quarts (10 litres) of
SAE 15W40 Compliant with SAE Specs for API
Class SJ and CH-4 Engine Oil.
n. Operate the engine at low idle, and check for
leaks at the filter and drain plug.
o. Stop the engine, wait 5 minutes, and check the oil
level. Add or remove oil to bring oil to HIGH level
mark on dipstick.
p. Close engine compartment hood.
q. Properly dispose of used oil and filter.
C
B