Integral keypad, Integral keypad -3 – Rockwell Automation 22F PowerFlex 4M User Manual FRN 1.xx - 2.xx User Manual

Page 37

Advertising
background image

Start Up

2-3

PowerFlex 4M Adjustable Frequency Drive FRN 1.xx - 2.xx User Manual

Publication 22F-UM001D-EN-E

Integral Keypad

Menu

Description

Display Group (View Only)
Consists of commonly viewed drive operating
conditions.

Basic Program Group
Consists of most commonly used programmable
functions.

Terminal Block Group
Consists of programmable functions for control
terminals.

Communications Group
Consists of programmable functions for
communications.

Advanced Program Group
Consists of remaining programmable functions.

Fault Designator
Consists of list of codes for specific fault
conditions. Displayed only when fault is present.

No. LED

LED State

Description

Run/Direction
Status

Steady Red

Indicates drive is running and commanded motor direction.

Flashing Red

Drive has been commanded to change direction. Indicates
actual motor direction while decelerating to zero.

Alphanumeric
Display

Steady Red

Indicates parameter number, parameter value, or fault code.

Flashing Red

Single digit flashing indicates that digit can be edited.

All digits flashing indicates a fault condition.

Displayed Units

Steady Red

Indicates the units of the parameter value being displayed.

Program Status

Steady Red

Indicates parameter value can be changed.

Fault Status

Flashing Red

Indicates drive is faulted.

Pot Status

Steady Green

Indicates potentiometer on Integral Keypad is active.

Start Key Status Steady Green

Indicates Start key on Integral Keypad is active.

The Reverse key is also active unless disabled by

A434

[Reverse Disable].

No. Key

Name

Description

Escape

Back one step in programming menu.

Cancel a change to a parameter value and exit Program Mode.

Select

Advance one step in programming menu.

Select a digit when viewing parameter value.

Up Arrow

Down Arrow

Scroll through groups and parameters.

Increase/decrease the value of a flashing digit.

Enter

Advance one step in programming menu.

Save a change to a parameter value.

Advertising