Rockwell Automation 1783-Mxxx Stratix 8000 and 8300 Ethernet Managed Switches User Manual - Manual (Page 100)

100 Rockwell Automation Publication 1783-UM003I-EN-P - March 2014
Chapter 4 Manage the Switch via the Device Manager Web Interface
Configure Port Thresholds Configure port thresholds to prevent traffic on a LAN from being disrupted by a
broadcast, multicast, or unicast storm on one of the physical interfaces.
To configure port thresholds, from the Configure menu, choose Port Thresholds.
Table 8 - Port Threshold Fields
Field Description
Incoming
Unicast For each port, do the following.
1. Check or clear the Enable checkbox.
2. Type the threshold value.
3. Choose one of these units:
– PPS (O…10 billion)
– BPS (O…10 billion)
– % (0…100)
Multicast
Broadcast
Outgoing
All Traffic For each port, do the following.
1. Check or clear the Enable checkbox.
2. Type the threshold value.
3. Click Save.