Rockwell Automation 1783-Mxxx Stratix 8000 and 8300 Ethernet Managed Switches User Manual - Manual (Page 137)

Rockwell Automation Publication 1783-UM003I-EN-P - March 2014 137
Manage the Switch via the Device Manager Web Interface Chapter 4
Restart the Switch Restarting or resetting the switch interrupts connectivity of your devices to the
network.
To restart or reset the switch, from the Admin menu, choose Restart/Reset.
Table 19 - Restart/Reset Fields
Field Description
Save running configuration and then restart the switch Ensures that any changes in the running configuration are
saved before the switch restarts.
Restart the switch without saving running configuration Restarts the switch with its previously saved configuration
settings.
Reset the switch to factory defaults, and then restart the
switch Resets the device to the factory-default settings, deleting
the current configuration settings, and then restarts the
device.
You will lose connectivity with the device and need to
initiate Express Setup to reconfigure the device.