Rockwell Automation 1783-Mxxx Stratix 8000 and 8300 Ethernet Managed Switches User Manual - Manual (Page 97)

Rockwell Automation Publication 1783-UM003I-EN-P - March 2014 97
Manage the Switch via the Device Manager Web Interface Chapter 4
Configure Port Settings The basic port settings determine how data is received and sent between the
switch and the attached device. You can change these settings to fit your network
needs and to troubleshoot network problems. The settings on a switch port must
be compatible with the port settings of the connected device.
Validation blocks you from configuring port roles for a routed port.
To change basic port settings, follow this procedure.
1. From the Configure menu, choose Port Settings.
2. Click the radio button next to the port to configure.
3. Click Edit.