Rockwell Automation 1783-Mxxx Stratix 8000 and 8300 Ethernet Managed Switches User Manual - Manual (Page 193)

Rockwell Automation Publication 1783-UM003I-EN-P - March 2014 193
Cables and Connectors Appendix D
Dual-purpose Ports The Ethernet port on a dual-purpose port uses standard RJ45 connectors. The
following figure shows the pinouts.
Figure 23 - Ethernet Port RJ45 Connector
The SFP module slot on a dual-purpose port uses SFP modules for fiber-optic
ports.
Console Port The console port uses an 8-pin RJ45 connector. The supplied RJ45-to-DB-9
adapter cable is used to connect the console port of the switch to a console
personal computer. You need to provide an RJ45-to-DB-25 female DTE adapter
if you want to connect the switch console port to a terminal.
IMPORTANT The auto-MDIX feature is enabled by default. For configuration information for
this feature, see the switch software configuration guide or the switch
command reference.
2 3 1 4 5 6 7 8 Pin Label
1
2
3
4
5
6
7
8 TP0+
TP0-
TP1+
TP2+
TP2-
TP1-
TP3+
TP3-