Rockwell Automation 1783-Mxxx Stratix 8000 and 8300 Ethernet Managed Switches User Manual - Manual (Page 120)

120 Rockwell Automation Publication 1783-UM003I-EN-P - March 2014
Chapter 4 Manage the Switch via the Device Manager Web Interface
To change the Static MAC Addresses table for a port, do the following.
1. Click the radio button next to the port to configure.
2. Click Edit.
3. Clear or check the Enable checkbox.
4. Configure MAC addresses as follows:
• To add the existing MAC addresses of devices currently connected to a
port, click Add Learned MAC Addresses.
• To add a specific MAC address to the table, type a MAC address in the
format fields and click Add.
• To remove a MAC address from the table, select the MAC address and
click Remove.
• To clear the MAC address table, click Remove All.
5. Click OK.